Melt and Pour Soap-Making: the perfect DIY Holiday project
Looking for a really easy, inexpensive project that will produce a gift nearly everyone loves? Try your hand at melt & pour glycerin soap making. This is distinct from ‘true’ hot process and natural cold process soap-making, which is much more involved and more time consuming. In M&P soaps, you can work on a simple project that will take you a short amount of time. Take advantage of the relative ease and get creative! There are lots of really interesting M&P soapers on Etsy from whom to get some inspiration. A lot of the fun comes from the molds you choose to use, the scents you add, the addition of botanicals in a clear glaze top, or the creation of fun and interesting designs such as this bacon and egg soap set.
One of the best parts of soap making is the inclusion of natural fragrance. My preference is always to use pure essential oils, which are the natural product of extracting (via steam distillation) the volatile oils from plants. I find synthetic fragrance oils to be cloying and irritating, and often unhealthy because of the addition of chemical fragrance fixatives such as “pthalates”, which have shown endocrine disruption in laboratory testing with mice.
The first step is finding Melt and Pour soap base. And then it’s as simple as that…you melt it and pour it into molds! I prefer to use organic soap base, such as Stephenson’s, as many bases are weighed down with more questionable ingredients such as sulfates, or often irritating chemical foaming agents.
You will want to use a stainless steel (not aluminum) or enamel coated pot. Put on a double boiler for best results, but I’ve also done fine melting the base over the lowest possible stove-top setting. Just be sure not to walk away too long, as you don’t want the soap to come to a boil.
1. Melt 2 lb block over low heat. (Stir with a utensil designated for soap making.)
2. Once melted, remove from heat.
3. Add fragrance to desired strength. I prefer about 60 – 100 drops essential oil to 2 lbs soap. If you add too much fragrance it will affect the quality of the soap.
4. Add some colorant if desired. You can buy soap chips from suppliers or use natural powdered herbs such as turmeric, which creates a lovely butter to deep orange color, depending on how much you use. You can also try regular old food coloring. Stir well until blended.
4. Pour into molds and allow to cool completely before popping out (an hour or two).
5. Wrap in cellophane to protect the glycerin, which is prone to “sweating” when exposed to humidity. I prefer to shrink wrap soaps, as they are best protected this way!
1. Melt clear base in one pot and an opaque base in another. Add fragrance to both when removed from heat.
2. Pour a thin, clear layer into your molds and sprinkle some herbs or blossoms on top (lotus, chamomile, calendula, and rose, or lemongrass are all nice choices)
3. Once that is somewhat cooled down, pour the opaque base into the mold.
4. Cool, pop out of molds, and wrap in cellophane.
From Nature with Love (melt and pour soap, essential oils, fragrance oils)
Essential Wholesale (essential oils)
Bramble Berry Soap Soap Making Supplies (everything, including molds)
Sun Feather Natural Soap Company (everything, including molds)
Post written by Sarah Powell, proprietor of natural bath, body, and herbal product business, Lilith’s Apothecary.